 |
ABC Hobby - Kawasaki Jet Ski EP RTR - In addition to the unique and recognizable Jet Ski design, it features an ultra-realistic jet drive system just like the full-size model. The jet drive features an enclosed impeller drive, making it safer to operate than nearly any other scale watercraft. And the hull design gives it stable handling and performance.
Features:Realistic design and detail. Pistol-grip radio pre-installed, Mechanical speed control with reverse
Specifications
Length: 23in. (585mmm)
Beam: 9.8in. (250mm)
Motor Size: 550
Prop Size: ducted
Speed Control: mechanical 2-speed forward with reverse
Hull Material: ABS
Trim Scheme Colors: blue/yellow/white
Kit/RTR: RTR
Drive System: direct
Battery: 7.2-8.4 volt sub-C
Radio: 2-channel pistol grip
Scale: 1:5
Needed to Complete
7.2 Volt Sub-C flat battery pack with Tamiya connector
Battery charger
8-AA alkaline batteries Part # ABC58091 |
$89.99
|
 |
The
AquaCraft Hammer RTR. No assembly or finishing is needed, and
on-board electronics come already installed. Radio and drive equipment
come already installed from the rudder servo and reverse-equipped
electronic speed control to the water-cooled, 550-size electric motor.
The waterproof radio compartment features a screw-down cover that
allows easy access to the on-board radio gear. Realistic deep vee
racer looks complete with twin cockpits add to the excitement.
Admire the Hammer at home on its supplied display stand! Part
# HCAB10 |
|

|
AquaCraft
Supervee 27 Brushless -
Insane electric speed and performance!
Brushless motors are the hot new power source in R/C, and AquaCraft
is leading the way in boat racing with the SuperVee 27! Right out
of the box, the SuperVee 27 boasts the extreme speed and performance
to be a worthy competitor in FE (Fast Electric) racing classes. But
its also easy enough for beginners to operate, and it comes
completely assembled, so you can be just minutes away from scalding
offshore action! BRUSHLESS motor power! Hand laid fiberglass
hull, painted, not gell coat!
A worthy competitor in FE (Fast Electric) racing classes but
also easy enough for beginners!
Completely assembled youre just 10 minutes away from
scalding offshore action!
SPECIFICATIONS
Stock Number: AQUB17**
Length: 27 in (686 mm)
Width: 8.13 in (205 mm)
Height: 5.5 in (140 mm)
RTR Weight (w/o batteries): 4.5 lb (2.04 kg)
Includes: AquaCraft B36-56 water-cooled brushless motor, brushless
45A ESC, AquaCraft 2-channel radio
Requires: (8) AA batteries for the transmitter; (2) 6-celll
battery packs with Deans Ultra connectors
Hull colors may vary Part # AQUB17** |
$269.99
|


|
AquaCraft
Supervee 27 Nitro - Sleek SuperVee looks. . . with NITRO power! It's the streamlined design that has captured the attention of boat racers everywhere...equipped with an .18-sized marine engine that's all about nitro power and performance! The SuperVee 27 Nitro is designed for all-out speed and maneuverability, but it's easy enough for even beginners to operate. And being ready-to-run means you'll be out on the water just minutes after taking it out of the box!
- Easy enough for beginners – fast enough for the experienced racer!
- Completely assembled and ready for action in just minutes!
Choose your favorite from six dazzling hull colors!
The SuperVee 27's hull is crafted from hand-laid fiberglass, and painted instead of gel-coated, each keyed to a different radio frequency.
Part # AQUB2272 |
$279.99
|

 |
Strike
fast, with the AquaCraft RTR Nitro Hammers ready-to-run
ease and nitro power! Factory-built, it features first-class materials
throughout from the durable fiberglass hull to the stainless
steel hardware that resists rust and corrosion. The long rudder cuts
deep for razor-sharp turns. Trim tab/turn fins on either side adjust
to ensure smooth, straight running. The AquaCraft
2-channel pistol radios steering dual rates and fine steering/throttle
trims add more precision to your control. In addition to fast, easy
recoil starting, the .15 Marine ABC engine includes a water-cooled
head, rotary carburetor with adjustable high and low needles, dual
ball bearings and glow plug. Includes a tanks
flip-top cap and efficient primer button. And like the engine and
fuel tank, the Nitro Hammers radio gear and electronics arrive
already installed, in a protective hatch you can quickly access just
by removing one pin. Part
# HCAB26
|
|
 |
Kyosho Seawind Kit
Based on Americas Cup Class racing yachts, the Seawind looks just as good as it sails. Manufactured from hardened ABS and aluminium with tear-resistant main and jib sails, the Seawind builds into a little work of art. The one-piece ABS hull is designed for minimum drag and optimum water penetration. With a model as big as this, transportation could have been a problem. However, Kyosho have designed the Seawind so that the mast, rudder, keel and keel weight can all be easily removed for travelling. The keel weight is covered by a rubber boot for improved appearance and safety to water life. A boat stand is supplied with the kit so that the Seawind can be displayed when not in use as well as offering a stable support during building or when at the boating lake.
Features
Technical Data
Length 998mm
Width 226mm
Height 1,850mm
Total Weight approx. 3,000g
Sail area Total 39 dm
Radio 2 channel (not included)
Part # KYO40460
|
$279.99
|

 |
IMEX PRO 600 OB Cruiser - Almost ready to run outboard engine boat.
Features:820mm long, 210mm wide, 2 channel radio with servo, 540 electric motor, 7.2 volt battery, outboard drive system, V hull design, and water proof receiver box.
Part # IMX3001 |
$189.99
|
|


 |
The Pro Boat ShockWave 55 SS is
a professionally built, ready-to-run deep-V fiberglass model. Powered
by the potent Zenoah® G26M engine, the boat has a clutch, water
pump, dual rudders and tuned pipe.
Key Features: No assembly required RTR
High-performance Zenoah® G-26M gas engine & tuned exhaust
installed
Enhanced engine mounting system makes maintenance and adjustment
easy
Clutch and water pump let the ShockWave idle safely without overheating
Stainless steel dual rudder design offers incredibly sharp handling
and durability
High-quality, pre-painted, fiberglass composite deep-V hull with
Super Sport trim scheme
JR® XR3i 3-channel radio system installed
The clutch system allows you to start and tune the engine without
the propeller engaging, for safer setup and operation. And the water
pump design ensures that the engine will get plenty of cooling,
even while the boat is standing still in the water. Stainless steel
dual rudders have been specially designed to maximize the ShockWaves
cornering ability and handling. The Prather propeller and adjustable
surface drive system offer plenty of thrust for maximum speed.
Part # PRB2650
Price
$929.99 + oversize shipping charge $50.00 = Total $979.99
|
$979.99
Oversize shipping charge included
|
 |
Pro Boat - Coast Guard Motor Lifeboat 30" EP RTR
Key Features:
- Authentically detailed fiberglass composite hull
- Preinstalled lighting kit
- Dual water-cooled motor and battery operation
- Sealed water-cooled electronic speed control with reverse
- Pro Boat 27MHz AM 2-stick radio
Part # PRB3500
Price
$199.99 + oversize shipping charge $25.00 = Total $224.99
|
$224.99
Oversize shipping charge included
|
 |
Pro Boat - Formula FASTech Brushless Deep-V RTR
Overview: The Formula FASTech is one of the most eye-catching performance boats on the water, and Pro Boat's scale replica is no different. Powered by a potent brushless electric motor and electronic speed control, the FASTech quickly reaches speeds of 30+ mph. The offset rudder and adjustable propeller strut allow precise handling in a variety of water conditions, and the magnetic hatch allows quick access to electrical components when you need it. Add the authentic "Lunar Reactor" trim scheme from Formula, and it's easy to see that there's absolutely nothing else like it on the water! |
Key Features
- Brushless electric power system allows for speeds of 30+ mph
- Offset rudder and adjustable propeller strut for improved handling
- Magnetic hatch with sealed radio box
- Authentic "Lunar Reactor" trim scheme
- Includes installed Pro Boat 2-channel 27MHz pistol-grip radio system
- Fiberglass composite deep-V hull for superior handling in rough conditions
- Water-cooled brushless ESC offers unsurpassed reliability
- Build under license from Formula/Thunderbird Products
- Runs on Dual 7.2V battery packs (required)
|
Part # PRB3750 |
$299.99
|
 |
Pro Boat - Vortex .46 Airboat RTR
Overview
Pro Boat is proud to introduce the latest in nitro airboat performance, the Vortex .46 RTR. Featuring an incredibly powerful, pre-tuned Evolution .46 engine already installed, the Vortex is the easiest to use airboat available. A large protective shroud adds safety while allowing easy access to the glow plug and needle valves. A Pro Boat 2-channel radio and receiver are already installed as well, so all that is needed are batteries and fuel. And the oversized rudder design offers excellent handling for quick turns.
|
Key Features
- Completely ready-to-run, with no assembly required
- Evolution .46 engine is air-cooled, easy-to-start and packs plenty of power
- Easy engine access for starting and tuning
- Sleek, durable fiberglass hull
- Oversized rudder for increased handling
- Protective shroud offers added safety without affecting performance
- Pro Boat 2-channel AM radio included
- Waterproof radio compartment beneath canopy offers easy access to radio equipment
|
Part # PRB2700
Price
$249.99 + oversize shipping charge $50.00 = Total $299.99 |
$299.99
Oversize shipping charge included
|



|
Pro Boat - Blackjack 26 Brushless Catamaran RTR
Overview
Pro Boat has done it again with its Blackjack 26 Brushless EP RTR. With incredible styling and high performance handling known to the Pro Boat brand, the Blackjack 26 Brushless is the perfect boat if you want extreme speed but don't want to hassle with nitro.
Like all other Pro Boat models, the Blackjack 26 Brushless EP RTR is completely ready to run. It comes with a programmable ESC for fast, reliable and convenient performance. The steerable drive system increases the superior handling and low maintenance of the Blackjack 26 Brushless EP RTR.
An installed Pro Boat pistol grip AM radio and a high quality, painted fiberglass hull add to the great looks and long reliable, high performance of the new Pro Boat Blackjack 26 Brushless EP RTR.
|
Key Features
- Brushless Electric Technology for fast, reliable and convenient performance
- Water-cooled A3630-1500 brushless motor and ESC keeps electronics cool
- Steerable drive system for superior handling
- High quality, prepainted fiberglass composite catamaran hull
- Pro Boat™ 2-channel AM 27MHz pistol-grip radio system installed
- Magnetic hatch and quick access radio box helps keep electronics dry
- Programmable ESC allow you to customize settings and use LiPo batteries.
|
Part # PRB3300 |
$299.99
|
 |
ThePrather
Fun Cruiser RTR R/C boat is one of the most complete and highest
quality Ready-to-run boats available. The novice can be on the water
and learn to drive the Fun Cruiser in a few minutes using the complete
detailed instructions. The experienced boater will enjoy the reliable,
economical gasoline powered engine and the quality workmanship and
materials. The Fun Cruiser's beautifully designed
46" hull uses the lines from the latest full size offshore racing
boats. The gel coated fiberglass hull is a combination of beauty and
strength. The gel coat provides a beautiful white finish while the
epoxy fiberglass construction provides strength and warp resistance.
The contest proven hull will cut through rough water and carve tight
turns with no tendency to hook or spin out. The factory installed
easy starting 25cc Homelite Special gasoline engine features an easy
pull starting rope and centrifugal clutch that allows the boat to
come to a stop at idle. Gasoline engines have many conveniences over
nitro-powered engines. They require little support equipment (just
a can of pre-mixed gas and oil), are economical to operate and are
extremely clean running. The 24 ounce tank provides a long 25-30 minute
run time. The factory installed receiver and servos are safely installed
in a water tight fiberglass radio box. A quality wheel pistol grip
transmitter insures positive steering control. SPECIAL
FEATURES...Fully Assembled - Ready to Run.
Prather 25cc Homelite Special Engine. Centrifugal Clutch. Easy Pull
Starter. Hi Performance Prather Prop included. Provides
25 to 30 minute run time. Pistol grip wheel radio factory installed.
Gel coated hull (No painting required). Hand laid fiberglass construction.
Color trim factory applied. Hatch Cover with Push button fasteners
installed. Boat stand included. Shock absorbing motor mount. Foam
flotation factory installed. Rudder and Strut sharpened and factory
installed - Step by step photo instructions including advice on where
to run, launching and driving, normal maintenance, trouble shooting,
and performance tips. Part
# PRA810
Price
$899.99 + oversize shipping charge $50.00 = Total $949.99
|
$949.99
Oversize shipping charge included
|
|

 |
The
Traxxas Blast RTR is designed to be fast, reliable,
and easy to drive. The Blast features our powerful, 20-turn, Stinger
motor; efficient, dependable, shaft drive; and the exclusive Nautica
electronic speed control. Nautica's digital circuitry provides fully
proportional throttle control and smooth, efficient operation. The
steerable outdrive and surface piercing prop work together with the
specially designed hull to keep the Blast on a solid course, even
during the most radical wave thrashing. It's exciting action in a
swimming pool and powerful fun on the open water .Best of all, the
Blast is fully-assembled and ready-to-run with the radio systems
and electronic speed control installed. You'll be challenged by the
waves, not an assembly manual. Blast's colorful decals and simple
operation get you out on the water and having fun, fast! Part
# TRA3810
|
|
|

 |
The Traxxas Villain EX RTR sets the new benchmark
in electric deep-V performance. Powered by dual motors and a 14+
volt electronic speed control, it streaks across the water at speeds
that are capable of embarrassing even some nitro boats. The Villain
EX is engineered to be fast, smooth, stable, and reliable; all the
perfect ingredients for fun R/C boating. The Villain EX is fully
assembled and Ready-To-Race®, so you're ready for action just
minutes out of the box. The Villain EX uses a water-cooled marine
version of our powerful EVX electronic speed control. At low speeds,
the fully proportional EVX Marine ESC allows precise dockside maneuvering
in forward and reverse. Lay on the throttle and the EVX pushes over
14 volts of power from two battery packs (not included) into the
twin Titan 550 Marine fan-cooled motors. This speed control
was originally developed for the powerful E-Maxx monster truck and
has a proven track record for ultimate performance and reliability.
It's made in the USA by Novak Electronics. Part
# TRA1502 |
|
 |
Venom Strait Jacket XL RTR Gas Boat
The Venom Strait Jacket XL Ready-to-Run Gas Boat has an agile yet very stable Deep Vee hull design. At almost 4.5 feet long, the Venom Strait Jacket XL RTR Gas Boat features a 2+ HP Water-Cooled 26cc Marine Engine that will rocket your boat to 35+ MPH / 56+ KPH right out of the box! With the included 3-Channel Programmable FM Radio with High Torque Servo's, Machined Aluminum Running Gear with Adjustable Drive Line, Hand-Laid Fiberglass Hull, Pre-Balanced Aluminum Propeller, a Sealed Acrylic Radio Box, Tuned Exhaust Pipe and a Laser Engraved padded wooden display stand, you will have a top of the line Ready-to-Run Gas Boat at an amazing price!
Features:
- Ready-to-Run
- Hand-Laid Fiberglass Hull
- Speeds to 35+ MPH/ 56+ KPH
- Equipped with a 26cc Marine Engine
- 3-Channel Programmable FM Transmitter
- High Torque Servo's
- Machined Aluminum Running Gear
- Pre-Balanced Aluminum Propeller
- Sealed Acrylic Radio Box
- Tuned Exhaust Pipe
Specifications:
Length: 52.5" (133.4cm)
Width: 15.25" (38.7cm)
Weight: 14.3 lbs (66 kg)
Chassis: Hand-Laid Fiberglass
Drive Train: Flex Shaft
Motor or Engine: 26 cc Marine Gas Engine
Radio: 3 Channel Programmable Transmitter
Batteries: (4) AA Part # VEN1809
Price
$699.99 + oversize shipping charge $50.00 = Total $749.99 |
$749.99
Oversize shipping charge included
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
ABC
HOBBY NORTHWIND 28 - Sailing fans will be excited to learn that
ABC has released the North Wind 28-a more compact version of their
sleek NorthWind 36 R/C yacht. The "28" shares virtually
all of the same features of its larger predecessor, including a durable
one-piece plastic hull and deck, as well as a two-piece mast of aircraft-grade
aluminum.
Like the "36", the "28" uses nothing
more than two standard servos to control sails and rudder. A 31/2"
arm attaches to one servo and handles sail "winch" duties.
The other servo controls the rudder via a bulletproof steel rod and
clevis arrangement that exits the rear of the yacht's "cabin"
and connects directly to the rudder's control arm. Aside from the
obvious cost benefits of not having to buy an expensive "winch"
servo, this servo arrangement makes it a cinch to swap out servos
and adjust controls. In our tests we found that JR's S517 BB Sport
Servos were more than adequate for both "winch" and rudder
duties.
Part
# ABC59400 |
|
 |
The Midwest Patriot Fireboat features two fire monitors that are activated using a simple model airplane fuel pump (not supplied) and a 3 channel R/C system. These monitors will typically shoot streams of water 4 - 6 feet! Your water supply is virtually endless, as the water you shoot comes from the lake, pool or pond you are operating in! Includes complete fittings set, complete decal set, stainless steel prop shaft and brass propeller. Hull Length: 25-1/4" Beam: 6-7/8 Scale: 1/2" = 1' (1/24) Requires 3 channel R/C system, Sonic-Tronics #249 6-volt electriv pump, and two 7.2-volt flat packs Part # MID993
|
$99.99
|
 |
Thunder
Tiger Victoria Sailboat:
Because of the low investment in time, money, and support equipment,
model sailing is a endeavor that can be enjoyed by the whole family,
no matter what age. Get on board and enjoy the sailing experience
whether you are relaxing on the shore of a silent and peaceful lake
on a beautiful Sunday afternoon or pushing your vessel to heel-over
hard, rounding the buoys in a heart-pounding race for America's Cup
as you enjoy the camaraderie of yacht racing. Standing
over four feet tall, the Victoria is a stately and lovely sailboat.
A one-piece molded hull/deck makes assembly very quick and enjoyable.
Colorful sails, bright trim, and deck details make this vessel look
good both on the water and on display. The
Victoria has been so popular as an economical, yet high performance
sailing vessel, the American Model Yachting Association has established
a Victoria Racing Class with a regional and national racing schedule.
Part
# TTR5556
|
|
| Marine Engines Go to
top of page |
Zenoah G231 Marine Gas Engine - 23 CC, Pull start, oil and gas mix. Part # ZENE231M |
$239.99
|
| Thunder Tiger Pro .21M Outboard Engine - 3.5CC Part # TTR9568 |
$189.99
|
| O.S. .21MX Outboard Engine - 3.5CC Part # OSM13940 |
$339.99
|
| O.S. .21RG-MX Marine Engine - 3.5CC w/Pull start Part # OSM13631 |
$159.99
|
| Traxxas Pro 15 Marine Engine - Standard crank shaft, Pull start Part # TRA4008 |
$99.99
|
| Traxxas 2.5 Marine Engine -Water cooled, Threaded crank shaft, Pull start Part # TRA5208 |
$129.99
|
|
|
|
|
|
|
|
|
|