![]() ![]() |
||
| This web site contains a sample of the many manufacturers
we carry as well as additional kits and parts. If you do not see what
you want here, please call us to find out about our huge inventory and
great prices! Please note that international, oversize
and multiple orders are subject to additional shipping cost. For all the latest information on RC Drag Racing check out www.rcdrags.com |
||
Drag Cars Page
Navigator |
||
Website Navigator |
|||
| RC Surface Kits - Home - Boats - Crawlers - Drag Cars - Helicopters - Large Scale - Monster Trucks-Electric - Monster Trucks-Nitro - Off Road Vehicles-Electric - Off Road Vevicles-Nitro - On Road Vehicles - Oval Cars |
RC Parts & Equip. - Batteries - Battery Chargers - Bodies - Crawler Parts - Drag Parts - Electric Motors - Large Scale Parts - Marine Engines - Nitro Engines - Oval Parts - Radio Systems - RC Car Kings Parts - Speed Controls - Team Associated Parts - Team Losi Parts - Tires - Traxxas Parts |
Specials - New Vehicles - Used Vehicles - New Parts - Used Parts Store Information |
Featured Item
RJ Speed 11" Pro Mod Drag Kit
|
![]() ![]() |
The Grand Motorsports Aftershock Dragster is ready to rumble! Grand
Motorsports Aftershock Top Fuel dragster kits are the most adjustable,
complete competition-level nitro drag kits available today, and include
many high-end features as standard equipment:
Features: Center-weighted engine / two-speed
location for optimum chassis balance/ Modular all-Aluminum / Graphite
chassis construction/ Easily Adjustable belt tension Graphite
Vented Brake Disc /Aluminum front 18T pulley/Composite rear 40T
pulley |
$529.99
2 Speed |
|
The GMS14 Funny Car kit includes a super
light carbon fiber/graphite chassis that incorporates a LIPO Friendly brace designed
to provide a strong platform at a reduced total weight. The chassis
has multiple battery cutouts for a variety of cell combinations which
provides the ability to adjust battery placement for maximum performance.
The new 4 point rear pod is designed for equal chassis flex and
support at the rear of the car which creates quicker transition
time during initial launch. Included in the kit are super light hollow
front axle, rear axle, lightweight steering components, and lightweight
rear hubs that keep rotating mass to a minimum. Completing this
kit are super strong front 1.5 inch rims, rear 12th scale foam tires,
bearings, body posts, hardware, and full instructions. This
kit does not include a body. The GMS14 will accept many of the 12
to 14 inch wheelbase Funny Car bodies. Features: Wheelbase - 12.5 to 13.5 inches. Number of cells. chassis accepts - 4
to 16 plus cells. Weight (rolling chassis minus body and
electronics) 7.8 oz. Front rims - 1.5 inch diameter with
o-rings. Rear tires - 2.5 inch diameter soft foam mounted
on 12th scale rims. Chassis material .093 inch carbon fiber/graphite
weave with center brace. Track width 4.5 F / 6.0 R inches. Aluminum parts are 6061 blue anodized aluminum. Rear Suspension
Solid, no T-Bar. Part # GMS1900 |
$219.99 Without Body
Same kit with your body choice - look in the next row! |
The GMS14 Funny Car kit - You Select a RAE Funny Car Body![]() |
The GMS14 Funny Car kit with a Clear RAE Body - Combo! Part # GMS1900FCB 1. Check out all the RAE Funny Car Drag bodies in the Body section on this page for full descriptions. Click here for RAE body chart. |
$239.99 With your Body Choice - Select Below.
|
![]() |
The GMS Dragster Kit includes a super light carbon fiber/graphite chassis and brace. The most interesting and unique point of the kit is the front axle, which has been specially designed and engineered for the lowest front-end steering weight possible. As with all of GMS drag kits, the Dragster includes super light components to keep weight down and eliminated the need to upgrade. Rear foams, front rims, hardware, and full instructions are all standard, as well. Features:Wheelbase 23.75 to 25 inches. Number of cells chassis accepts - 4 or more cells. Weight (rolling chassis minus body and electronics) 8.2 oz.. Front rims 1.0 inch diameter with o-rings. Rear tires - 2.5 inch diameter soft foam mounted on 12th scale rims. Chassis material - .093 inch carbon fiber/graphite weave with center brace. Body not included - Chassis will accept Top Fuel Body. Track width - 3.0 F / 6.0 R inches. Aluminum parts are 6061 blue anodized aluminum. Rear Suspension - Solid, no T-Bar. Part # GMS1000 | $219.99 Without Body
|
![]() |
The Dragster Kit with a Clear GMS Top Fuel 2005 Body Part # GMS1000TFB |
$248.99 With GMS Top Fuel body
|
|
GMS 11 Pro Stock / Pro Mod Kit includes a super light carbon fiber/graphite chassis that incorporates a LIPO Friendly brace designed to provide a strong platform at a reduced total weight. The chassis has multiple battery cutouts for a variety of cells, and provides the ability to adjust battery placement for maximum performance. The new 4 point rear pod design for equal chassis flex and support at the rear of the car. This creates quicker transition time during initial launch. The kit includes super-light hollow front axle, rear axle, lightweight steering components, and lightweight rear hubs that help keep rotating mass to a minimum. The aluminum motor plates and top plate were designed to allow the racer to remove the motor in seconds. Completing this kit are super strong front 2.0"rims, rear 1/10 scale foam tires, bearings (front and rear), body posts, hardware, and full instructions. Features: Wheelbase 11 inches. Number of cells 4- to 16 plus cells. Weight (rolling chassis minus body and electronics) 7.5 oz. Front rims - 2.0 inch diameter with o-rings. Rear tires - 2.5 inch diameter soft foam mounted on 10th scale rims. Chassis material - .093 inch graphite weave with center brace. Body - Chassis will accept many styles and types of 10 to 11 inch wheelbase bodies. Track width - 5.0 F / 6.0 R inches. Aluminum parts - 6061 blue anodized aluminum. Rear Suspension - Solid, no T-Bar. Part # GMS1800 | $209.99 Without Body Same kit with your body choice - look in the next row!
|
The GMS 11 Kit - You Select a RAE Drag Body![]() |
GMS
11 Kit with a Clear RAE Body - Combo! Part # GMS1800PSB 1. Check out all the RAE 11 inch wheelbase Drag bodies (not RAE Classics) in the Body section on this page for body descriptions. |
$229.99 With your Body Choice - Select Below.
|
![]() ![]() |
RJ Speed -Nitro Pro Stock - NITRO KIT FEATURES::OUR NITRO KITS INCLUDE THE COMPLETE CHASSIS, O-RING FRONTS AND 1.5” WIDE REAR FOAM TIRES, ADJUSTABLE ALUMINUM ENGINE MOUNTS, FUEL TANK WITH REAR MOUNT, THROTTLE SERVO MOUNT, LINKAGE AND BRAKE STRAP, 32 PITCH AXLE GEAR, STAINLESS STEEL SOLID REAR AXLE, NYLON ADJUSTABLE BODY MOUNTS, AND LEXAN BODY WITH PROTECTIVE FILM, WINDOW MASKS, AND WING WHEN REQUIRED. REQUIREMENTS: OUR KITS REQUIRE A 12 TO .18 SIZE “SMALL BLOCK” ENGINE , CLUTCH ASSEMBLY TO MATCH THE CRANKSHAFT TYPE, CLUTCH BELL, MUFFLER OR EXHAUST PIPE, AIR CLEANER, FUEL TUBING, AND A 2 CHANNEL RADIO SYSTEM WITH 2 SERVOS. Part # RJS2101 |
$129.99 |
![]() ![]() |
RJ Speed -Nitro Funny Car - NITRO KIT FEATURES: OUR NITRO KITS INCLUDE THE COMPLETE CHASSIS, O-RING FRONTS AND 1.5” WIDE REAR FOAM TIRES, ADJUSTABLE ALUMINUM ENGINE MOUNTS, FUEL TANK WITH REAR MOUNT, THROTTLE SERVO MOUNT, LINKAGE AND BRAKE STRAP, 32 PITCH AXLE GEAR, STAINLESS STEEL SOLID REAR AXLE, NYLON ADJUSTABLE BODY MOUNTS, AND LEXAN BODY WITH PROTECTIVE FILM, WINDOW MASKS, AND WING WHEN REQUIRED. |
$129.99
|
![]() ![]() |
RJ Speed -Nitro Dragster -NITRO KIT FEATURES: OUR NITRO KITS INCLUDE THE COMPLETE CHASSIS, O-RING FRONTS AND 1.5” WIDE REAR FOAM TIRES, ADJUSTABLE ALUMINUM ENGINE MOUNTS, FUEL TANK WITH REAR MOUNT, THROTTLE SERVO MOUNT, LINKAGE AND BRAKE STRAP, 32 PITCH AXLE GEAR, STAINLESS STEEL SOLID REAR AXLE, NYLON ADJUSTABLE BODY MOUNTS, AND LEXAN BODY WITH PROTECTIVE FILM, WINDOW MASKS, AND WING WHEN REQUIRED. REQUIREMENTS: OUR KITS REQUIRE A 12 TO .18 SIZE “SMALL BLOCK” ENGINE , CLUTCH ASSEMBLY TO MATCH THE CRANKSHAFT TYPE, CLUTCH BELL, MUFFLER OR EXHAUST PIPE, AIR CLEANER, FUEL TUBING, AND A 2 CHANNEL RADIO SYSTEM WITH 2 SERVOS. Part # RJS2103 |
$129.99
|
![]() |
RJ Speed - 1/10 Electric Powered, Radio Controlled 24" Wheelbase Dragster Kit. - FEATURES: Chassis: Two piece composite fiberglass with vertical stiffener Drive: Rear wheel drive Brass bushings support the rear axle and front wheels Suspension: Adjustable pull rod rear suspension Gearbox: Open with rear pinion and spur gear Differentials: No differential model has a solid rear axle Tires: 1/10 scale foam pan car style on black rims on the rear and rubber o-ring style tires on black rims on the front Wheels: Black plastic, multi-spoke on front and rear Suspension: Adjustable pull rod type Camber Tie Rods: Fixed Steering Tie Rods: Adjustable Servo Saver: Required for steering servo (NOT INCLUDED) INCLUDES: One 24" Wheelbase Dragster Kit, mounted rear foam tires, front o-ring tires and wheels, 81 tooth spur gear (48P), 20 tooth pinion (48p), brass bushings, clear polycarbonate dragster body with window mask and wing and building instructions. - REQUIRES: Radio: 2-Channel with 1 Servo (two servos required if you are going to be using a micro switch instead of a speed control. (We do stock a micro switch (25amp) that would work check below under parts) Radio Batteries: (8) AA size Speed Control: electronic of modelers choice Motor: 550 size motor of modelers choice Battery: 6-cell stick or side-by-side with standard connector Charger: AC/DC timed or peak for 6-cell battery Paint: Polycarbonate paint of modelers choice Misc. Items: Building and track equipment. Part # RJS2003 |
$99.99 |
![]() |
R.A.E.
Classic Missle Dragster C1 - Classic Dragster clear Body for 24 inch wheelbase with enclosed driver's
compartment and detailed drag engine. Fits 24 inch wheelbase dragster
chassis (RJ Speed - Above) or can also be used for Nitro dragsters by trimming to fit. Part # RAE708 |
$29.99 |
![]() |
R.A.E. Classic Streamline Dragster C2 - Classic Dragster clear Body for 24 inch wheelbase with driver's compartment, front wing and detailed drag engine. Fits 24 inch wheelbase dragster chassis (RJ Speed - Above) or can also be used for Nitro dragsters by trimming to fit. Part # RAE709 | $29.99 |
![]() |
RJ Speed 13" Wheelbase Funny Car Kit. - 1/10 scale Electric Powered, Radio Controlled, 2WD- FEATURES: Chassis: Computer cut composite fiberglass chassis Drive: Rear wheel Brass bushings support the rear axle and front wheels Suspension: Adjustable pull rod rear suspension Gearbox: Open with rear pinion and spur gear Differentials: No differential model has a solid rear axle Tires: 1/10 scale foam pan car style on black rims on the rear and rubber o-ring style tires on black rims on the front Wheels: Black plastic, multi-spoke on front and rear (the photo shows white rims but black are included in the package) Suspension: Adjustable pull rod type Camber Tie Rods: Fixed Steering Tie Rods: Adjustable Servo Saver: Required for steering servo (NOT INCLUDED)
INCLUDES: One 13" Wheelbase Funny Car Kit, mounted rear foam tires,front o-ring tires and wheels, 81 tooth spur gear (48P), 20 tooth pinion (48p), brass bushings, clear polycarbonate body with window mask and wing and building instructions. _ REQUIRES: Radio: 2-Channel with 1 Servo (two servos required if you are going to be using a micro switch instead of a speed control. (We do stock a micro switch (25amp) that would work check below under parts) Radio Batteries: (8) AA size Speed Control: electronic of modelers choice Motor: 550 size motor of modelers choice Battery: 6-cell stick or side-by-side with standard connector Charger: AC/DC timed or peak for 6-cell battery Paint: Polycarbonate paint of modelers choice Misc. Items: Building and track equipment. Part # RJS2002 |
$99.99 |
![]() |
RJ Speed 11" Pro Mod Drag Kit - Description: Complete less electrics. Includes our new Pro Mod chassis designed for up to 10 cells and hotter motors than our Pro Stock chassis. 2" o-ring front tires, 1.5" wide rears. Cool Pro Mod body! Part # RJS2004 |
$99.99
|
![]() |
RJ Speed 11" Wheelbase 2WD Pro Stock Kit. - 1/10 scale Electric Powered, Radio Controlled, - FEATURES: Chassis: Computer cut composite fiberglass chassis Drive: Rear wheel Brass bushings support the rear axle and front wheels Suspension: Adjustable pull rod rear suspension Gearbox: Open with rear pinion and spur gear Differentials: No differential model has a solid rear axle Tires: 1/10 scale foam pan car style on black rims on the rear and rubber o-ring style tires on black rims on the front Wheels: Black plastic, multi-spoke on front and rear (the photo shows white rims but black are included in the package) Suspension: Adjustable pull rod type Camber Tie Rods: Fixed Steering Tie Rods: Adjustable Servo Saver: Required for steering servo (NOT INCLUDED) INCLUDES: One 11" Wheelbase Pro Stock Kit, mounted rear foam tires,front o-ring tires and wheels, 81 tooth spur gear (48P), 20 tooth pinion (48p), brass bushings, clear polycarbonate body with window mask and wing and building instructions. REQUIRES: Radio: 2-Channel with 1 Servo (two servos required if you are going to be using a micro switch instead of a speed control. (We do stock a micro switch (25amp) that would work check below under parts) Radio Batteries: (8) AA size Speed Control: electronic of modelers choice Motor: 550 size motor of modelers choice Battery: 6-cell stick or side-by-side with standard connector Charger: AC/DC timed or peak for 6-cell battery Paint: Polycarbonate paint of modelers choice Misc. Items: Building and track equipment. |
$99.99 |
![]() |
Protoform 1111 Funny Car Body - It’s BACK! This classic Fuel Coupe clear body comes with a separate rear spoiler. Clear body dimension are: 5.75 inches wide in the front to 6.65 in the rear, 21 inches long. Made from .030" lexan. Fits most 12 to 14 inch wheelbase funny car drag chassis, wider than #2400 for the best fit on any Nitro Funny Car chassis. Part # GMS2800 |
$29.99 |
![]() |
R.A.E. Top Fuel Body- Electric - This modern dragster clear body fits
the Grand Motorsports, Walbern, Lockmann and many other dragster chassis.26.25"
long. Comes with two injectors
styles! Part # RAE614 Click on picture for larger image |
$39.99 |
| R.A.E. Nitro Dragster Body - This dragster clear body fits
the Grand Motorsports, Walbern, DSR and many other long-wheelbase nitro
dragster chassis. 26.50" long, 3" wide at the cockpit, 1.5
at the ft. axle. Comes with long and short front winglets, too. Part # RAE615 Click on picture for larger image |
$39.99 |
|
![]() |
R.A.E.
Pro Body R05 - Pro Stock clear body with molded hood scoop and fine
details. Body has narrow front at 5.2 inches and is 6.75 at rear wheels.
18.26 inches long and pulled in Lexan. Includes protective film, window masks and decals. Part # RAE600 |
$29.99 |
![]() |
R.A.E.
Pro Mod Body R57 - Pro Mod clear body with molded hood scoop and extra
fine details. Body has narrow front at 5.3 inches and is 6.75 at rear
wheels. 19.5 inches long and pulled in Lexan. Includes protective film, window masks and decals. Part # RAE601 |
$29.99 |
![]() |
R.A.E. Super Comp R34 Body with molded hood scoop and extra fine details.
Clear body has narrow front at 5.4 inches and is 7.25 at rear wheels. 17.5
inches long and pulled in Lexan. Also includes separate rear wing. Includes protective film, window masks and decals. Part # RAE602 |
$29.99 |
![]() |
R.A.E. Pro Mod R67 Body with molded hood scoop and extra fine details.
Clear body has narrow front at 5.5 inches and is 7.35 at rear wheels. 19.5
inches long and pulled in0 Lexan. Includes protective film, window masks and decals. Part # RAE603 |
$29.99 |
![]() |
R.A.E. Super Gas R57R Body - Clear drag body with molded hood scoop and extra fine
details. Body has narrow front at 5.3 inches and is 6.75 at rear wheels.
19.5 inches long and pulled in Lexan. Includes protective film, window masks and decals. Part # RAE604 |
$29.99 |
![]() |
R.A.E. Stude Pro Mod body with molded hood scoop and extra fine details.
Clear body has narrow front at 6.50 inches and is 7.40 at rear wheels. 19.80
inches long and pulled in Lexan. Includes protective film, window masks and decals. Part # RAE605 |
$29.99 |
![]() |
R.A.E. Sylvester G. Pro Stock Body was designed with molded hood scoop
and fine details. Clear body has narrow front at 6.30 inches and is 6.80
inches at rear wheels. 18.10 inches long and pulled in Lexan.
Includes protective film, window masks and decals. Part # RAE606 |
$29.99 |
![]() |
R.A.E. 04 Pro Stock Body - This clear body comes with a separate rear spoiler that is
die cut and allows the angle to be adjusted for downforce. Body dimension
are: 6.0 inches wide in the front to 6.75 in the rear, 18.25 inches
long. Made from lexan. Fits most 10.5 - 11 inch wheelbase
drag chassis. Part # RAE607 |
$29.99 |
![]() |
R.A.E. 33 Coupe Body Molded-in bugcatcher and chute
pack! Clear Body dimension are: 5.75 inches wide in the front to 6.625 in
the rear, 15.65 inches long. Made from lexan. Fits most
10.5 to 11 inch wheelbase chassis. Part # RAE608 |
$29.99 |
![]() |
R.A.E. 53 Pro Mod Body - This clear body comes with a separate rear
spoiler that is molded to fit the rear contours of the trunk and fenders.
The spoiler can be trimmed for a variety of applications. Body dimension
are: 6.0 inches wide, 18.25 inches long. Made from lexan.
Fits most 10.5 - 11 inch wheelbase drag chassis. Part # RAE609 |
$29.99 |
![]() |
R.A.E. 05 Funny Car Body - This modern Fuel Coupe clear body comes
with a separate rear spoiler. Body dimension are: 5.25 inches wide
in the front to 6.25 in the rear, 20.125 inches long. Made from
lexan. Fits most 12 to 14 inch wheelbase funny car drag chassis. Part # RAE610 |
$29.99 |
Click on picture for larger image |
AERO 1 ED11 Electric Top Fuel Body
Features:
ADVANCED BODY DESIGN. WILL ALLOW A FORWARD BATTERY MOUNTING POSTION ON THE CHASSIS WITHOUT ANY MODIFICATION OR CUTTING. PULLED IN .030" LEXAN AND INCLUDES A SEPERATE INJECTOR SCOOP. OVERALL LENGTH OF 32" WITH A MAIN BODY WIDTH OF 2 1/2". Part # RAE611 Click on picture for larger image Our Low Retail Store Price $34.99 + $5 oversize shipping due to the UPS Dimensional Weight (long box) = $39.99 |
$39.99
|
![]() |
R.A.E 09 Funny Car Body- This modern Fuel Funny Car body comes clear
with a separate rear spoiler. Body dimension are: 5.6 inches wide
in the front to 7.0 in the rear, 21.5 inches long. Made from .030"
lexan. Fits most 12 to 14 inch wheelbase funny car drag chassis, wider than #610 so it will fit well on any Nitro Funny Car chassis. Also includes protective film and window masks and decal sheet Part # RAE612 Click on picture for larger image |
$29.99
|
![]() |
R.A.E.SoxMod Pro Mod Body- This clear body comes with a molded rear spoiler and separate side plates. Body dimension are: 5.6 inches wide in the front to 6.75" in the rear, 18.5 inches long. Made from Lexan. Fits most 11-12 inch wheelbase drag chassis. Also includes protective film and window masks and decal sheet Part # RAE613 Click on picture for larger image |
$29.99
|
![]() |
R.A.E. Classic Pro Mod C55 Body - Drag clear body comes with cool molded in blower
and great detail. This body really works well in the air and has many
E.T. and MPH records through the years. Pulled in Lexan
with protective film and window masks. Fits 10.5 to 11 inch wheelbase
chassis. Part # RAE700 |
$29.99 |
![]() |
R.A.E. Classic Pro Mod C63 Body - Drag clear body with cool molded in hood scoop
and great detail. Pulled in Lexan with protective film
and window masks. Fits 10.5 to 11 inch wheelbase chassis. Part # RAE701 |
$29.99 |
![]() |
R.A.E. Classic Pro Mod C41 Body - Drag clear body with cool molded in blower and
great detail. Pulled in Lexan with protective film and
window masks. Fits 10.5 to 11 inch wheelbase chassis. Part # RAE702 |
$29.99 |
![]() |
R.A.E. Classic Pro Stock C96 Body - Drag clear body with cool molded in hood scoop
and great detail. This body works well in the air. Pulled in
Lexan with protective film and window masks. Fits 10.25 to 10.5 inch
wheelbase chassis, and Bolink narrow drag chassis. Part # RAE703 |
$29.99 |
![]() |
R.A.E. Classic Pro Stock C97 Body - Pro Stock clear drag NARROW body with cool molded in hood scoop and great detail.
This body works well in the air. Pulled in Lexan with protective film
and window masks. Fits 10.25 to 10.75 inch wheelbase chassis, and
Bolink narrow drag chassis. Part # RAE705 |
$29.99 |
![]() |
R.A.E. Classic Funny Car C03 Body - Drag clear body with cool molded in blower and great detail. This body really works well in the air and has many E.T. and MPH records through the years. Pulled in Lexan with protective film and window masks. Fits 12.0 to 13.5 inch wheelbase chassis (Bolink, Lockmann, Grand Motorsports, Walbern, DragMaster). Part # RAE704 | $29.99 |
![]() |
R.A.E. Classic Funny Car C02 Body - Classic Funny Car clear body with cool molded
in blower, separate rear wing and great detail. This body really works
well in the air and has many records through the years. Fits 12.0
to 13.5 inch wheelbase chassis.
(Bolink, Lockmann, Grand Motorsports, Walbern, DragMaster). Pulled
in Lexan with protective film and window masks. Part # RAE706 |
$29.99 |
![]() |
R.A.E. Classic Funny Car C01 Body - Classic Funny Car clear body with cool molded
in blower, separate rear wing and great detail. This body really works
well in the air and has many records through the years. Fits 12.0
to 13.5 inch wheelbase chassis.(Bolink, Lockmann, Grand Motorsports,
Walbern, DragMaster). Pulled in Lexan with protective film and window
masks. Part # RAE707 |
$29.99 |
![]() |
R.A.E.
Classic Missle Dragster C1 Body - Classic Dragster clear body for 24 inch wheelbase with enclosed driver's
compartment and detailed drag engine. Fits 24 inch wheelbase dragster
chassis or can also be used for Nitro dragsters by trimming to fit. Includes protective film, window masks. Part # RAE708 |
$29.99 |
![]() |
R.A.E. Classic Streamline Dragster C2 Body - Classic Dragster clear body for 24 inch wheelbase with driver's compartment,
front wing and detailed drag engine. Fits 24 inch wheelbase dragster
chassis or can also be used for Nitro dragsters by trimming to fit. Includes protective film, window masks. Part # RAE709 |
$29.99 |
![]() |
R.A.E. Classic Pro Truck C99 Body - Classic NARROW Pro Truck clear body with cool
molded in hood scoop and great detail. This body works well in the
air. Pulled in Lexan with protective film and window masks. Fits 10.25 to 10.5 inch wheelbase narrow width
chassis (Grand Motorsports, Lockmann, Walbern, DragMaster, Trinity). Part # RAE710 |
$29.99 |
![]() |
R.A.E. Classic Pro stock C96W Body - WIDE - Drag clear body with cool molded in hood scoop
and great detail. This body works well in the air. Pulled in Lexan with protective film and window masks. Fits 10.25 to 10.5 inch
wheelbase chassis, and wide drag chassis and nitro, electric TOURING CAR Chassis. Part # RAE711 |
$29.99 |
![]() |
R.A.E. Classic Pro
Stock C98 Body - Classic WIDE Pro stock clear body with cool molded in hood scoop and great detail. Pulled in
Lexan with protective film and window masks. 7 inches wide in front, 7.5 inches wide at rear wheels - Fits
10.25 to 10.5 inch wheelbase wide chassis. (fits some Electric Touring chassis). Includes protective film, window masks. Part # RAE712 |
$29.99 |
![]() |
RJ Speed 11" W.B. Pro Stock Drag Body - Description: Pro Stock Drag Race Body 11” wheelbase 1/10 scale. Comes clear with protective
film and window masks. Fits 10 to 11 ½ “ wheelbase chassis. Part # RJS1002 |
$26.99 |
![]() |
RJ Speed Dragster Body 24” w/wing - Description - Fits RJ SPEED, BoLink and other 1/10 chassis with approximately 24” wheelbase. Comes clear with protective film and window masks. Includes clear wing Part # RJS1007 |
$27.99 |
![]() |
RJ Speed Funny Car Body 13” wheelbase w/wing - Description - Fits RJ SPEED, BoLink and other 1/10 chassis with 12 to 13 ½ “ wheelbase.
Comes clear with protective film and window masks. Includes wing. Part # RJS1008 |
$26.99 |
![]() |
RJ Speed Dragster Body for 30” W.B. Nitro Rails - Description - DRAGSTER BODY FOR 30” W.B. NITRO RAILS. Part # RJS1013 |
$26.99 |
![]() |
RJ Speed CAMARO PROMOD BODY - Description: THIS PROMOD clear BODY FITS RJS PROSTOCK AND OTHER DRAG CHASSIS WITH 10.5" TO 12" WHEELBASE. THEY ARE MADE FROM CLEAR LEXAN AND HAVE PROTECTIVE FILM AND WINDOW MASKS. LENGTH 18.5 (470MM) WIDTH 7.5 (190) HEIGHT 4.5 (114) |
$26.99 |
![]() |
RJ Speed F41 Willys ProMod Body - Description -
THIS PROMOD BODY FITS RJS PROSTOCK AND OTHER DRAG CHASSIS WITH 10.5" TO 12" WHEELBASE. THEY ARE MADE FROM CLEAR LEXAN AND HAVE PROTECTIVE FILM AND WINDOW MASKS. LENGTH 18.5 (470MM) WIDTH 7.5 (190) HEIGHT 4.5 (114) Part # RJS1020 |
$26.99 |
![]() |
RJ Speed 50's Pro Mod Sedan Body - Description: 040 LEXAN MADE TO FIT 1/10 DRAG CARS WITH 11" TO 12" WHEELBASE. INCLUDES LEXAN SHEET FOR REAR AIR DAMS, WINDOW MASK, AND PROTECTIVE FILM. ALSO CAN BE USED ON E-MAX, REVO, ECT. LENGTH 19 (483MM) WIDTH 6.5 (165) HEIGHT 4.5 (114) Part # RJS1040 |
$26.99 |
![]() |
Grand Motorsports Wheelie Bar System Designed to allow optimum weight transfer under acceleration, the new GMS wheelie bar system allows you to tune and control your launch by absorbing the energy of a wheelstand without unloading one (or both) rear tires. Bolts directly onto any AfterShock Nitro chassis, instructions included for adapting to most GMS electric chassis. Part # GMS777 |
$78.99 |
Mugen 2-Speed Parts Set for GMS nitro drag cars MUG # T0224 - 1st Gear 48 tooth (Note - You will need the 2 speed shaft from Grand Motorsports) |
$109.99
|
|
![]() |
Grand
Motorsports 1/10th Scale (Rear or left) Drag Hub - 1/10th Scale
hub dual clamp style. Made from 6061 aluminum and blue anodized. Accepts
1/10 scale drag rims as well as popular spur gears and fits
1/4 diameter axles. Part # GMS705 |
$24.99 |
![]() |
Grand Motorsports 1/12th Scale Rear Drag Hub - 1/12th Scale scale hub with set screws. Made from 6061 aluminum and blue anodized. Accepts 1/12 scale drag rims as well as popular spur gears and fits 1/4 diameter axles. Part # GMS729 | $18.99 |
![]() |
Drag Car Bearing Kit - Includes (2) 1/4 x 3/8 flanged and (4) 1/8 x 5/16 flanged bearings for front and rear axles. Part # RCK0180 | $19.99 |
| Grand Motorsports Rear Graphite Drag Axle - 1/4 inch diameter precision graphite. 4 1/2 inches wide. Part # GMS704G | $9.99 |
|
| Grand Motorsports Rear Solid Drag Axle - 1/4 inch diameter precision turned Solid aluminum. 5 inches wide. Part # GMS704S | $7.99 |
|
| Grand Motorsports 3.5 inch Front Axle - 1/4 inch diameter precision turned aluminum. 3.5 inches wide and and blue anodized. Part # GMS903 | $8.99 |
|
| Grand Motorsports Dragster Front Axle Assembly. For GMS Dragster kits with pivot type of steering. Includes the axle, pivot nut, mounting screw, spring and retaining nut. Part # GMS1003 | $37.99 |
|
![]() |
Grand Motorsports Front Drag Steering Arms. Fits 1/8 inch kingpin and has 1/8 inch axles. Sold as a pair. Part # GMS722 | $14.99 |
![]() |
Grand
Motorsports - Aluminum Clamp Block - sold as one part - Part # GMS719 ea. |
$9.99 |
![]() |
Grand
Motorsports -Dragster and Pro Stock Kits - Graphite Top Plate Part # GMS740 |
$18.99 |
![]() |
Grand Motorsports - Graphite top plate - Fits all GMS kits - Part # GMS751 | $23.99 |
![]() |
Grand
Motorsports - DragSpec rear plastic hub - sold as one part - Part # GMS762 ea. |
$6.99 |
![]() |
Grand
Motorsports - DragSpec plastic clamp block - sold as one part Part # GMS763 ea. |
$4.99 |
![]() |
Grand Motorsports - Graphite GMS11 chassis - Part # GMS1801 | $78.39 |
![]() |
Grand Motorsports - Graphite GMS14 chassis - Part # GMS1901 | $78.39 |
![]() |
Grand Motorsports - G-10 front body mount - fits GMS11, GMS14, Pro Stock and DragSpec kits Part # GMS805 | $9.99 |
| Grand
Motorsports - GMS11 chassis brace without mounts - G10 - Part # GMS1909 |
$6.99 |
|
| Grand
Motorsports - Front axle kingpin with serrated shaft - sold as one part Part # GMS721 ea. |
$3.99 |
|
![]() |
Grand Motorsports Motor Plate - Right side - This plate allows the mounting of the electric motor as well as the axle carrier for the right side. Anodized blue. Fits all GMS electric drag kits. Part # GMS713 | $35.99 |
![]() |
Grand
Motorsports Motor Plate - Left side - This plate allows the mounting
of the e axle carrier for the left side. Anodized blue. Fits all GMS
electric drag kits. Part # GMS714 |
$24.99 |
![]() |
RJ Speed -
WHEELIE BAR KIT FOR ELEC. & NITRO Part # RJS5030 |
$15.99 |
![]() |
RJ Speed -
DRAGSTER CHASSIS WITH BRACE FOR ELEC. & NITRO Part # RJS5031 |
$18.99 |
![]() |
RJ Speed -
FUNNY CAR CHASSIS W / BRACE, BODY MOUNT FOR ELEC Part # RJS5033 |
$18.99 |
![]() |
RJ Speed -
7" Long Wheelie Bar Kit Part # RJS5037 |
$16.99 |
![]() |
RJ Speed -
PRO MOD CHASSIS FOR ELEC Part # RJS5038 |
$24.99 |
![]() |
RJ Speed -
PRO STOCK CHASSIS FOR ELEC Part # RJS5039 |
$13.99 |
![]() |
RJ Speed -
NITRO RAIL SUBFRAME Part # RJS5131 |
$9.99 |
![]() |
RJ Speed -
NITRO FUNNY CAR CHASSIS W/BRACE Part # RJS5133 |
$14.99 |
![]() |
RJ Speed -
PRO STOCK FRONT AXLE FOR ELEC. & NITRO Part # RJS5134 |
$5.99 |
![]() |
RJ Speed -
NITRO PRO STOCK/PRO MOD CHASSIS Part # RJS5139 |
$15.99 |
![]() |
RJ Speed -
NITRO DRAG BOTTOM PLATE Part # RJS5140 |
$10.99 |
![]() |
RJ Speed -
NITRO DRAG AXLE MOUNT (2) Part # RJS5141 |
$9.99 |
![]() |
RJ Speed -
NITRO DRAG THROTTLE PLATE Part # RJS5142 |
$7.99 |
![]() |
RJ Speed -
NITRO DRAG REAR TANK PLATE Part # RJS5143 |
$5.99 |
![]() |
RJ Speed -
ALUMINUM ENGINE MOUNT (2) Part # RJS5144 |
$9.99 |
![]() |
RJ Speed -
ALUMINUM ENGINE MOUNT SPACERS (2 W/HDWE) Part # RJS5145 |
$5.99 |
![]() |
RJ Speed -
THROTTLE PLATE SUPPORTS (2) Part # RJS5146 |
$7.99 |
![]() |
RJ Speed -
MOTOR MOUNT PLATE FOR ELEC Part # RJS5167 |
$5.99 |
![]() |
RJ Speed -
L.AXLE MOUNT PLATE FOR ELEC Part # RJS5168 |
$4.99 |
![]() |
RJ Speed -
SWITCH PLATE FOR ELEC Part # RJS5169 |
$5.99 |
![]() |
RJ Speed -
DRAGSTER SUB FRAME FOR ELEC Part # RJS5231 |
$9.99 |
![]() |
RJ Speed -
FUNNY CAR BODY MOUNT FOR ELEC. & NITRO Part # RJS5234 |
$4.99 |
![]() |
RJ Speed -
RAIL / FUNNY CAR FRONT AXLE PLATE FOR ELEC. & NITRO Part # RJS5238 |
$4.99 |
![]() |
RJ Speed -
ANGLE BRACKET, TAPPED (4) Part # RJS5282 |
$5.99 |
![]() |
RJ Speed -
SET SCREW HUB Part # RJS5311 |
$2.99 |
![]() |
RJ Speed -
GEAR / WHEEL HUB Part # RJS5312 |
$7.99
|
![]() |
RJ Speed -
STEERING BLOCKS (2) Part # RJS5351 |
$3.99 |
![]() |
RJ Speed -
KINGPIN, SHORT (2) Part # RJS5358 |
$4.49 |
![]() |
RJ Speed -
THREADED STUB AXLES W/NUTS (2) Part # RJS5364 |
$4.49 |
![]() |
RJ Speed -
KINGPINS W/NUTS (2) Part # RJS5377 |
$4.49 |
![]() |
RJ Speed -
Part # RJS5747 |
$4.49 |
![]() |
T.M.R.C.
Drag Racing Rear 10th Scale Rear Foam Tire -Standard foam compound
for drag racing. Fits 10th scale hubs. Size 1.5 inches wide and 2.6
inches tall. Part # TMRC7870 |
$17.99 |
![]() |
T.M.R.C.
Drag Racing Rear 10th Scale Rear Foam Tire - Soft foam compound
for drag racing. Fits 10th scale hubs. Size 1.5 inches wide and 3.0
inches tall. Part # TMRC7871-S |
$23.99
|
![]() |
T.M.R.C.
Drag Racing Rear 10th Scale Rear Foam Tire - Medium foam compound
for drag racing. Fits 10th scale hubs. Size 1.5 inches wide and 3.0
inches tall. Part # TMRC7872-M |
$23.99
|
![]() |
T.M.R.C.
Drag Racing Rear 12th Scale Rear Foam Tire - -Standard foam compound
for drag racing. Fits 12th scale 4 bolt hubs. Size 1.5 inches wide
and 2.6 inches tall. Part # TMRC7850 |
$17.99 |
![]() |
T.M.R.C.
Drag Racing Rear 12th Scale Rear Foam Tire Soft foam compound
for drag racing. Fits 12th scale 4 bolt hubs. Size 1.5 inches wide
and 3.0 inches tall. Part # TMRC7300-S |
$23.99
|
![]() |
T.M.R.C.
Drag Racing Rear 12th Scale Rear Foam Tire - Medium foam compound
for drag racing. Fits 12th scale 4 bolt hubs. Size 1.5 inches wide
and 3.0 inches tall. Part # TMRC7301-M |
$23.99
|
![]() |
T.M.R.C Nitro Rear Foam Tire - Soft drag compound foam mounted on a 10
th scale BBS rim. That are 1 1/2" wide
3 1/4 tall with 1/2" offset Part # TMRC7876
|
$23.99
|
![]() |
T.M.R.C.
Nitro Rear Foam Tire- Wide- Soft drag compound foam tires are 2"
wide and 3 1/4" tall. They are mounted on a 10 th scale. Black
Max rims. Part # TMRC7875
|
$26.99
|
![]() |
T.M.RC 1 inch front drag rims. O-ring included. Pair Part # TMRC7915 | $12.99 |
![]() |
RJ Speed 1.5 inch front drag rims. - Black - O-ring included. Pair Part # RJS2501 |
$12.99 |
![]() |
RJ Speed 1.5 inch front drag rims. -White - O-ring included. Pair Part # RJS2503 |
$12.99 |
![]() |
T.M.RC 1.5 inch front drag rims. O-ring included. Pair Part # TMRC7910 | $12.99 |
![]() |
R/C
Car Kings 2 inch front Ultralight drag rims. - Black - O-ring
included. Pair Part # RCK0269 |
$12.99 |
![]() |
RJ Speed 2.0 inch front drag rims. - White- O-ring included. Pair Part # RJS2504 |
$12.99 |
![]() |
RCK
Receiver Battery Pack. - 6 volt 300mh with
Futaba connector. Part # RCK300 |
$16.99 |
![]() |
The Hitec HS-81micro servo - With a fine balance between speed
and torque, the HS-81s were designed to be both economical and
reliable. They make great servos for the throttle and steering
on electric drag cars, and steering on Nitro cars. Torque 4.8/6.0v
: 36 / 42 oz. Speed 4.8/6.0v : 0.11 / 0.09 second Size 1.2
x 0.5 x 1.2" Weight - Nylon 0.58 oz Part # HRC31081J |
$19.99 |
![]() |
The Hitec 5245MG performance digital mini servo - With a custom programmable digital circuit and our strong metal and M/P gear train technology, the HS-5245MG is ideal for applications that call for a small, lightweight, fast and high torque servo. This is great for the throttle/brake application
on Nitro drag cars. Torque 61.10 / 76.37 oz.in (4.8v/6v). Speed 015 / 0.12 sec @ 60 deg. Size : 1.27" x 0.66" x 1.21" Weight : 1.12oz Part # HRC35245S |
$49.99
|
![]() |
The Hitec HS-7975HB servo features the Karbonite gear technology that offers four times the strength of nylon with no flex or wear resulting in incredible precision and that “locked in feel”. Featuring our our G2 second generation programmable digital circuit with twice the resolution of our original circuit and added programmable overload protection. Speed - 0.14 / 0.11 sec @ 60 deg. Torque - 119 / 144 oz.in (4.8v/6v). SIZE - 1.57" x 0.78" x 1.45" Weight 1.87 OZ. Part # HRC37975S |
$74.99 |
![]() |
25 Amp Micro Switch - Used in conjunction with a throttle/brake servo in electric drag cars. Part # RCK250
|
$9.99 |
![]() |
Koford Traction Compound - Available in three
different compounds, light, medium and heavy. Applied to rear drag
foam tires for increased traction. 1 once bottle. |
$3.99 |
![]() |
Koford Traction Compound - MEDIUM Part # KFD320 | $3.99 |
![]() |
Koford Traction Compound - HEAVY Part # KFD319 | $3.99 |
![]() |
Steering Kit - This steering kit can be used to attach the steering arms to the servo on drag cars. Kit includes (4) rods with Z bends, (2) 1/8 collars and instruction sheet. Part # RCK0265 |
$2.99 |
| We have "tons of parts" and accessories to support your drag racing be it Nitro or Electric (Fuel, glow plugs, nitro engines and parts, electric motors, gears, radios, servos, tires, batteries, paint, servo tape, wire, connectors, battery chargers, solder, battery bars and much more)! Too much to list! | Call us! | |









