| HPI Go
to top of page |
|
The HPI Firestorm 10T RTR - combines HPI's legendary durability with the high performing, nitro burning, Firestorm stadium truck platform. Built to conquer whatever you throw at it, the already well-equipped Firestorm just got even better! It still packs the same all metal gear drivetrain, extremely powerful G3.0 power plant and aluminum tuned pipe just to name a few. It now comes loaded with an HPI 2.4GHz radio system, two fresh new body graphics, shiny chrome Scorch wheels, and bonus accessories to get you up and running - glow igniter, fuel bottle, extra glow plug, 4-way wrench, and Plazma AA's for your transmitter and receiver!
Features:
* High-power G3.0 engine
* Twin-chamber aluminum tuned pipe
* Bulletproof all metal gear transmission
* Steel front and rear axles and dogbones.
* Fiber brake disk with piston actuation.
* 16 high efficiency ball bearings.
* Adjustable turnbuckles at camber and
steering rod positions.
* Captured hinge pins throughout.
* High quality dual stage air filter.
* M 0.8 pitch spur and clutch bell
Part # HPI105865 |
$319.99
|
  .
|
HPI Nitro RS4
MT2 RTR, How do you make the next generation Nitro MT 2 truck even better? Add more power, more speed, and extra durability! We added the powerful and exciting G3.0 engine which has already been setting things alight in the Firestorm 10T. The G3.0 has .18 cubic inches of displacement (versus .15 cubic inches on the T-15 engine) that helps it crank out more torque and higher top speed, propelling the Nitro MT 2 G3.0 to over 45mph! Now that's FAST!
For maximum power we optimized the gear ratios for the G3.0 engine and added a new aluminum dual chamber tuned pipe and aluminum tube header to help the engine breathe freely and efficiently, and a new high flow dual-stage air filter that helps keep out dust and dirt for extended engine life! A new 100cc fuel tank is 50% larger than the original Nitro MT 2 fuel tank for extended run time between pit stops
Factory assembled 4WD chassis with pre-painted body in your choice of red or blue, radio system and G3.0 engine.Also contains a detailed instruction manual. Pre-built and ready to go!
Part # HPI10410 |
$339.99
|
| Kyosho Go to top of page |
|
Kyosho INFERNO MP-7.5 Sports 5 NEO RTR
Features
- New Threaded Big-Bore Shocks - Features heavy duty big bore oil shocks as standard. Takes even the harshest punishment for long periods without complaint and provides excellent damping power. Strong 3.5mm Big Bore Shocks deliver smooth and effective damping for sure-footed performance on a wide range of surfaces.
- Large Diameter Wheels - The new Inferno NEO comes equipped with the same strong wheels as the MP9 competition kit.
- New Kyosho Tires - New micro-square pattern tires are pre-mounted giving you full traction on a wide range of surfaces.
- New Super Air Flow Body - Includes a new factory-painted body that efficiently channels airflow for greatest aerodynamic effect.
- Flexibility & Rigidity - Composite torque rods on front and rear deliver optimal flexibility and rigidity along the chassis and increase the effectiveness of the suspension for greater traction and consistent handling.
- Hard Anodized - The main chassis, upper and front upper chassis plates and the engine head are anodized in black for added strength and surface hardness giving all your components a longer lifespan.
- New GX21BK Big Block Engine - Includes the GX-21BK engine with a recoil starter and a tuned muffler. The black anodized cylinder head features a new design that dissipates heat more quickly for cool, consistent performance.
- New Blue 17mm Hubs - New Anodized Blue17mm wheel hubs. Now you can use all standard 17 mmm wheels.
- Endless Adjustments - The suspension and steering linkages feature turnbuckles, which allows for quick adjustments to the camber and steering toe angles. All that's needed is a 5.5mm wrench to make any adjustment on the spot - there's no need to detach or move anything to facilitate an adjustment
- Full Ball Bearings - Full ball bearings throughout for maximum efficiency through the drive system.
- Tough Buggy - Factory-assembled chassis shares the same tough characteristics and low center of gravity as the World Championship winning Inferno 7.5
- Tuned Muffler - Includes hand-welded manifold and tuned muffler.
- 4WD - Shaft-driven 4WD chassis with three differentials.
- New Clutch System - New 2-piece clutch realizes efficient power transfer and full adjustability by changing your springs (spring rate) you can control all aspects of your clutch.
- Universal Swing Shafts - Equipped with Front Universal Swing Shafts for more of an efficient drive train.
- KT-6 Transmitter - Equipped with a reliable KT-6 transmitter and radio system, all components are pre-installed.
- 125cc. Fuel Tank - 125cc fuel tank delivers long run times for even more dirt action.
Part # KYO31280T1B
|
$329.99
|
| Ofna Racing Go to top of page |
|
Ofna
Jammin X1 CRT Pro Kit. Designed, developed
& tested in the USA by Jammin Jay Halsey. FEATURES Long
travel front suspension with increased up-travel. (Makes the truggy
more forgiving and easier to drive). Long travel rear suspension with
increased up-travel. (Makes the truggy more forgiving and easier to
drive)Large 150cc fuel tank - Mounted lower and more towards center
of chassis for consistent handling. Front Spindles - CNC machined
hard anodized aluminum with new t-bolt kingpin design. (no more gluing).
Chassis - CNC machined hard coated aluminum. (smooth bottom, machined
on top so engine, fuel tank & differentials can sit lower into
chassis.Pro line Crimefighter MT tires with Jammin dish wheels. Engine
Mounts - Hard anodized billet aluminum, easily adjustable with cooling
fins. Fuel filter - hard anodized aluminum with mount. Helps prevent
dirt and air from entering your engine.Rear Toe-In Block - CNC machined
hard anodized aluminum 2.5 degree rear toe in block. New anti-fade
fiber front & rear disc brakes. Front lower CNC machined hard
anodized B-Block.Lay-down steering servo for lower CG. Servo savers
also mounted closer together for less bump steer. Radio & receiver
pack box mounted low for lower CG but still has a large amount of
room for electronics. Front/rear roll centers engineered for aggressive
handling and pinnacle performance.
Part
# OFN34963 |
$479.99
|
|
OFNA and Picco have teamed up again to create the PICCO OFF-ROAD Buggy. The PICCO OFF-ROAD has unmistakable style, value and performance all wrapped up into one limited edition package. white on black theme carries on throughout the entire MBX Chassis. Black anodized aluminum contrasts with a white high down force rear wing, white dish wheels and white springs on the 16mm super big bore shocks. A special black cooling head resides on top of a 3-port Picco BAS engine completing the sinister look. You only find this kind of versatility, style and performance when industry powerhouses like OFNA and Picco get together on a project of this magnitude.
Features: Picco BAS .21 Engine, Hard Coated Kick-Up Chassis, Pivot Ball Suspension, 16mm Super Big Bore Shocks, Hi Down Force Wing, Complete Radio System Installed, High Grip Tires Pre glued to White Dish Rims, Aluminum Tuned Pipe and Header, Fully Adjustable Suspension.
Part # OFN34952
|
$329.99
|
|
OFNA
Ultra LX 2 RTR - 1/8th Nitro Buggy PART #34308 - RTR
Key Features:
- .28 Nitro Engine
- Front C-Hub suspension
- 2.4 GHz radio system
- 16MM Aluminum shocks
- Front universals
- Aluminum shock towers
- Stone Guards
- High performance triad racing tires
- Ultra lite dish wheels
- Fuel tank with integrated holding clips and splash guard
- Front and rear chassis braces
- Front and rear sway bars
- Dual fiber disc brakes
- Easy access battery box
- 3 Shoe competition racing clutch
- High flow air filter
- Aluminum motor mount
- Hard coated aluminum chassis
- Sealed bearings
- Cab forward body design
- Sealed radio box
- High-Down force wing
Part # OFN34308 |
$299.99
|
|
OFNA Hyper 7 - PCR Pro. PCR
is setting the standard for high performance, high quality, affordable
equipment. The same holds true for the new Hyper 7 PCR Pro. Equipped
with bleeding-edge racing technology, this buggy is all you need
to push it to the limit, and then some. Re-engineered radio tray
holds the new 'lay-down' style mounted servos, which provides for
a clean look, better leverage and a lower center of gravity. Features: Oil Filled Coil-over Shocks.
Front And Rear Aluminum Chassis Braces. Low center of gravity 'Lay-down'
servo mounts. CNC PCR Shock Towers. Full Ball Bearing Set. Front,
Rear & Center Universals. Fully Adjustable Suspension. New front
upper arm - 17 degree adjustment. Graphite Radio Tray. Center Spider
Differential Included. Low-profile Radio Tray Box. Toolset with
Lifetime Guarantee. Padded Carrying Bag. Hard Coated Kick-up Chassis. And Much More.
Part
# OFN 14329 |
|
| Tamiya Go to top of page |
| Team Associated Go to top of page |
|
The Team Associated SC8 - Red Bull Body –
where scale authenticity and high-performance meet! Starting with the championship-winning RC8T truggy platform, the SC8 was designed to meet the scale specifications of the full-size short course race trucks. It's all there, from the scale suspension travel, to the roll-cage tube diameter, to the functional mud flaps. The result is the SC8, a creation of an unparalleled scale experience at a level of performance that has never been seen before in true scale.
The fully assembled and ready-to-go SC8 features include:
• Authentic, custom painted and finished scale licensed short course truck body.
• Mounted and assembled scale wheels & tires with foam inserts and bead guards.
• Functional full roll cage with integral dirt shields.
• XP3D Computerized Digital 3-Channel FM Radio System with 10-model memory.
• Powerful Pro.28 engine with slide carburetor and dual stage air filter.
• Pro-Start hand-held starting system.
• S2008 metal gear high-torque steering servo.
• Hard-anodized shock bodies, 4mm shock shafts, and protective rubber boots.
• Hard-anodized 3mm thick 7075 aluminum chassis.
• Team Associated 2-chamber tuned muffler.
• 3mm low-profile black anodized aluminum shock towers.
• 3mm black anodized aluminum steering rack with ball-bearing steering system.
• Sealed radio box with thread-through molded antenna mount.
• Fuel bottle and glow igniter included.
Part # ASC80920 |
$599.99
|
|
The Team Associated SC8 - Bully Dog Body –
where scale authenticity and high-performance meet! Starting with the championship-winning RC8T truggy platform, the SC8 was designed to meet the scale specifications of the full-size short course race trucks. It's all there, from the scale suspension travel, to the roll-cage tube diameter, to the functional mud flaps. The result is the SC8, a creation of an unparalleled scale experience at a level of performance that has never been seen before in true scale.
The fully assembled and ready-to-go SC8 features include:
• Authentic, custom painted and finished scale licensed short course truck body.
• Mounted and assembled scale wheels & tires with foam inserts and bead guards.
• Functional full roll cage with integral dirt shields.
• XP3D Computerized Digital 3-Channel FM Radio System with 10-model memory.
• Powerful Pro.28 engine with slide carburetor and dual stage air filter.
• Pro-Start hand-held starting system.
• S2008 metal gear high-torque steering servo.
• Hard-anodized shock bodies, 4mm shock shafts, and protective rubber boots.
• Hard-anodized 3mm thick 7075 aluminum chassis.
• Team Associated 2-chamber tuned muffler.
• 3mm low-profile black anodized aluminum shock towers.
• 3mm black anodized aluminum steering rack with ball-bearing steering system.
• Sealed radio box with thread-through molded antenna mount.
• Fuel bottle and glow igniter included.
Part # ASC80923 |
$599.99
|
|
Associated RC8 Factory Team Kit - The 1:8 buggy racing world will wonder how they lived without the Factory Team RC8!
From the correctly balanced and optimized weight distribution, silky smooth and reliable shocks featuring 4mm gold shafts, innovative clutch design, to the machined chassis, every inch of the RC8 screams performance and durability. From the proven drive train to the ultimately adjustable wing, you will see why the Factory Team RC8 will be the buggy chosen to dominate the competition.
Features:
Assembly - assembled
Engine carb - none
Body - unpainted
Radio - none
Bearings - rubber sealed bearings
Shocks - threaded, hard anodized shock bodies
Wheels - white AE dish wheels, no tires
Rear axles - CVAs with rubber boots
Engine adapters -
21 rear exhaust, slide carb only
Part # ASC80900 |
$399.99
Reduced!
|
|
Team Associated is proud to bring to you the Factory Team RC8T, a 1:8 scale full-blown racing truggy based on the successful RC8 platform! Like the Factory Team RC8 buggy before it, the highly anticipated RC8T will raise the performance bar for 1:8 nitro truggies.
- Factory assembled shocks, diffs, and turnbuckles. Factory Team shock and diff fluids included.
- Factory Team "Big Bore" threaded, hard-coated shocks feature 16mm six-hole pistons and 4mm gold shock shafts for maximum smoothness.
- Factory Team aluminum top plate and steering rack for the ultimate truggy durability.
- Factory Team chassis braces with integrated center stiffener that maintains chassis integrity.
- 4mm woven carbon fiber shock towers for maximum rigidity, strength, and light weight to keep the center of gravity low.
- Blue aluminum wheel hexes featuring captured drive pins and nyloc wheel nuts providing the ultimate in security.
- The 4.30:1 ratio gear boxes produce maximum punch, allowing the RC8T to accelerate harder out of the corners and up the biggest jumps.
- FFC Free Float Caliper brake system eliminates the possibility of unwanted brake drag while on throttle.
- Two-piece split-center diff mount allows quick and easy access to the center diff.
- Wing angle and position is fully adjustable and secure.
- High-torque capacity three-shoe aluminum clutch.
• Full CVAs with captured CVA pins.
- Full ball bearing drivetrain and steering.
• Metric hardware throughout.
- Milled 3mm black hard-coated 7075 aluminum chassis.
- Factory Team blue titanium turnbuckles.
Part # ASC80910
|
$499.99
Reduced!
|
|
The Associated RC8RS "Race Spec" RTR is based on the Factory Team RC8, making for the only 1:8 buggy with the high performance qualities that can live up to Team Associated's toughest standards. The RC8RS is a winner right out of the box and is pure Associated, having been designed for the highest level of performance and off-road fun, with more suspension travel than any other buggy in its class. Designed to take all of the punishment and abuse that a competitive 1:8 scale buggy will face, but to meet those challenges without breaking a sweat, in a convenient ready-to-run package, the RC8RS is yet another, Champion By Design.
The fully assembled and ready-to-go RC8RS features include:
- Team Associated’s powerful .28 Pro engine
- Pro-Start hand-held starting system
- Painted and pre-mounted body with custom graphic decal kit
- S2008 metal gear steering servo and S1903 throttle servo
- Hard-anodized 3mm thick 7075 aluminum chassis
- Team Associated 2-chamber muffler
- Sealed radio box with thread-through molded antenna mount
- fuel bottle
- 3mm low-profile black anodized aluminum shock towers
- Pre-mounted Team Associated tires and molded inserts on dish wheels
- Hard-anodized shock bodies with pre-load clips, 4mm shock shafts, composite shock caps and rubber boots
- XP3D computerized digital 3-channel FM radio system with 10-model memory
- 3mm black anodized aluminum steering rack with ball-bearing steering system Part # ASC80905
|
$529.99
|
|
The
Associated Factory Team GT2 - offers more
punch and durability due to the all-new 4.09:1 ratio transmission.
Power enters the gearbox through a more efficient dual-disc slipper
clutch that lays the power down and helps save the drive-train during
hard landings. The GT2’s new 2-shoe clutch is adjustable with
optional springs that will transfer the power down to the ground in
all track conditions. The GT2’s large diameter clutch fits SG
type crankshafts and includes larger, more reliable heavy-duty ball
bearings. A free-floating disc brake on the top shaft insures smooth,
fade-free brakes during long A-mains. The drag brake is conveniently
adjusted by turning the included thumb wheel.
The GT2 chassis is composed of a hard-anodized 6061
aluminum chassis plate with a molded front kick-up and a modular
radio tray. The "dual-deck" layout provides the optimum
front-to-rear chassis stiffness, allowing the race-proven suspension
to keep the GT2 hooked up. The GT2’s radio tray features a
sealed receiver box to protect electronics from fuel splashes and
is easily removed for quick clean up. The newly designed fuel tank
has a large lever for easy access and the quickest fuel stops. Floating
fuel tank mounts reduce vibration and minimize the shock from hard
landings. The GT2 also sports a sealed battery box, which keeps
the receiver battery safe and secure.
All new suspension geometry makes the GT2 the best-handling
gas truck ever. The new suspension components are optimized for
maximum durability and long-lasting performance. The front and rear
suspension mounts interlock to the chassis to keep the suspension
geometry consistent and durable. Rebuildable CVA drive shafts, full
ball bearings, molded front and rear shock towers, and a ball bearing
dual bell-crank steering system with adjustable servo saver complete
the package.
Features: 4:09:1 ratio gear box. Hi-Torque
2-Shoe clutch. Posi-Lock Quick-Change System
Hard anodized 6061 aluminum chassis with molded kickup. Blue aluminum
front bulkhead
Blue aluminum hinge pin brace. Blue tuned muffler and manifold.
Rear suspension mounts are keyed to the chassis for maximum strength
and consistent settings. Easy-to-remove radio tray. Sealed receiver
box with embossed AE logo. New easy-to-open 82cc fuel tank for fast
pit stops. New a-arm design and material for maximum durability.
New heavy-duty steering blocks. Molded front and rear shock towers.
Dual bellcrank steering with adjustable servo saver. Vertical ball
stud adjustment on both front and rear upper link
New rod ends with aluminum pivot balls.
Part
# ASC7080 |
$274.99
|
|
Team
Associated GT2 RS Ready to Run
Blue anodized aircraft aluminum chassis. Radical
new chassis design adds tremendous rigidity for the ultimate in
consistency and handling that no other truck can claim. Radical
pre-printed body shell that any pro painter would be proud to produce.
Our proven #2916 AE .15X engine will shock customers with its power
and speed, like no other manufacturer's pull start engine sold in
any RTR. Our Engine Replacement Policy is a win-win deal for customers
and Hobby Shops. High traction tires front and rear with molded
inserts for consistent handling and long life in all track conditions.
The completely new design of the GT2 RS RTR makes it easy to work
on and maintain--which is good for everyone from the Hobby Shop
to the owner. Shielded bearings throughout the truck.
XP2 radio with these outstanding features:
* Quick access to frequency crystal (crystal and antenna are included)
* On/Off switch
* Adjustable trigger for large or small hands
* Steering wheel angled 10 degrees
* Servo reversing switch
* External charging jack: allows for recharging the transmitter.
AA batteries only (batteries not included)
* Steering dual-rate
* Throttle trim
* Steering trim
* Throttle ATV low
* Throttle ATV high
* Battery level indicator
Part
# ASC7092 |
$279.99
|
| Team Losi Go to top of page |
|
Team
Losi 8IGHT 1/8 4WD Competition Buggy Kit
Unique narrow chassis configuration for quicker
handling and ground clearance
Innovative drivetrain layout with centrally mounted engine
Oversized shocks with threaded hard anodized shock bodies
Centrally located dual stage air cleaner
4mm thick machined and hard anodized aluminum chassis plate
Removable one-piece radio tray with separate boxes for the receiver
and battery
Two battery box tops for different size receiver packs
Staggered brake disk sizes for better brake balance and feel
Sealed front and rear differential housings keep dirt out of the
gears
Zero bump steer design with adjustable Ackerman
Captured hinge pins require no retaining clips
Machined premium aluminum 5mm thick alloy shock towers
Four shoe easily tuned clutch with oversized inner bearing
Needed to complete: .21
Buggy Engine, Tuned Exhaust System, 2 channel radio system w/high
torque servo, Paint for polycarbonate bodies, Starter box, Assembly/maintenance
tools
Part
# LOSK0800 |
$ 369.99
|
|
Losi's 1/8-scale 8IGHT 2.0 Ready-to-Run Nitro Buggy makes it easier than ever for anyone to experience the excitement of driving a 1/8-scale buggy or get into off-road 1/8-scale competitive racing. Designed with the entry-level driver in mind, the 8IGHT 2.0 RTR is completely assembled and ready-to-run with the chassis, wheels, tires and electronics already installed.
- EXTENDED-LENGTH CHASSIS
- 1400 NIMH RECEIVER BATTERY
- HEAVY-DUTY SILICONE FILLED DIFFERENTIAL CASES
- SURE-CLOSE™ FUEL TANK WITH PULL
- HEAVY-DUTY BRAKE DISKS
- PRECISION STEERING GEOMETRY AND SERVO SAVER
- RUGGED RADIO TRAY DESIGN
- BIG BORE ALUMINUM THREADED ADJUSTABLE SHOCKS
- HEAVY-DUTY REAR OUTER HINGE PINS
- REINFORCED REAR BEARING INSERT SYSTEM
- LIGHTWEIGHT CAMBER LINKS
- TUNABLE SUSPENSION GEOMETRY
Part # LOSB0084
|
$689.99
|
|
Losi 8IGHT-T 2.0 RTR - Race to the finish line and beyond with the 8IGHT-T 2.0 RTR. The 1/8-scale 8IGHT-T 2.0 Ready-to-Run Nitro Truggy from Losi makes it easier than ever to experience the thrills of driving a 1/8-scale truggy or get into off-road competition. Plus, the 8IGHT-T 2.0 RTR is the only truggy to include a Spektrum DX3S 2.4GHz DSM radio system, a Losi 454 .28 engine and a custom starter box.
- EXTENDED LENGTH CHASSIS
- RUGGED RADIO TRAY DESIGN
- LENGTHENED SUSPENSION ARMS
- ZERO-OFFSET WHEELS
- NIMH RECEIVER BATTERY
- HEAVY-DUTY SILICONE FLUID-FILLED DIFFERENTIAL CASES
- HEAVY-DUTY BRAKE DISKS
- RACE-LENGTH SHOCKS
- PRECISION STEERING GEOMETRY
- SURE-CLOSE™ FUEL TANK
- HEAVY-DUTY REAR OUTER HINGE PINS
- REINFORCED REAR BEARING INSERT SYSTEM
- TUNABLE SUSPENSION GEOMETRY
- CENTER DRIVESHAFT GREASE BOOTS
- 50T CENTER SPUR GEAR
Losi 8IGHT-T 2.0 RTR
|
$769.99
|
|
Team Losi 810 1/8th Scale Nitro Buggy - RTR - POWER. SPEED. DESIGN.
A chassis with the best power to weight ratio available, a Losi 3.4 nitro engine that delivers the most power in its class. Interference-free Spektrum 2.4GHz DSM technology. A lightweight aluminum chassis. The 4-wheel drive 810 Buggy RTR has it all. And it's affordable
- Lightweight black anodized aluminum chassis
- Oversized 12mm anodized, threaded shocks
- 4mm tie rods with captured ends
- Digital servo for precise, powerful steering control
- Twin disc brakes for quick and reliable 4 wheel stopping
- Large capacity 82cc fuel tank for longer run times
- Tank clunk for fuel pickup even when rolled over
- 2-Shoe centrifugal clutch
- 450-Series, track-proven Knobby tires mounted on white wheels
- High-performance tuned-pipe designed to maximize the 3.4's potential
- Two-stage air filter system to ensure a clean air intake
- Sway bars included for better control and handling
- Spektrum SR300 receiver with 2.4GHz DSM technology
Part # LOSB0021
|
$399.99
|
|
Team Losi Ten T Nitro Truggy - RTR
Packing all of the innovation and performance of Losi's groundbreaking 1/8-scale nitro platform into a 1/10-scale truggy, the TEN-T™ RTR is built to take on any terrain or any track. The TEN-T packs unmatched and unprecedented features into its compact, agile design including Losi's 3.4cc performance small block engine, Losi's revolutionary Remote Onboard Starting System (R.O.S.S.) and Spektrum's DX3S radio system with integrated Telemetry.
- Lightweight black anodized aluminum chassis
- Oversized 12mm anodized, threaded shocks
- 4mm tie rods with captured ends
- Losi digital steering servo for precise, powerful steering
- Twin disc brakes for quick and reliable 4 wheels stopping
- Large capacity 75cc fuel tank for longer run times
- Tank clunk for fuel pickup even when rolled over
- 2-shoe centrifugal clutch
- 320-series Zombie Max™ tires mounted on chrome 320 Force wheels
- Losi 3.4cc performance engine with slide valve carburetor
- High performance tuned-pipe designed
to maximize the 3.4's potential
- R.O.S.S. module to control one-touch
remote starting
- Two-stage air filter system to ensure
a clean air intake
- Sway bars included for better control
and handling
- R.O.S.S. on-board ROSS starting system
- 7.4V LiPo Receiver Battery Pack and Charger Included
Part # LOSB0126
|
$499.99
|
| Thunder Tiger Go to top of page |
|
Thunder
Tiger EB4 1/8 Racing Buggy
Designed by Franco Sabattini and manufactured to
Thunder Tiger's rigid specifications, this is the 1/8 buggy everyone
has been waiting for. The EB-4 includes all of the features of a
competition buggy. It comes standard with sealed ball bearings,
silicone filled shocks, silicone filled differentials, steel main
gear, metal brake disc, 3-shoe clutch, front and rear chassis stiffeners,
front and rear sway bars, quick change battery holder, water tight
receiver box, 125cc fuel tank, Zytel wheels and wing, and GRP tires. Highlights: The EB-4 also offers unlimited tuning flexibility to adapt to different
driving styles. Flexible features like adjustable camber, adjustable
front caster, adjustable front track, adjustable wheel base, adjustable
rear toe-in, and adjustable differential gear mesh are standard
on the EB-4. With front kick-up, rear anti-dive, and extra long
suspension, the EB-4 handles the jumps with ease. The low center
of gravity and near 50/50 balance give the EB-4 greater stability
down the straightaway and through the chutes.
Part
# TTR6201 |
$299.99
|
|
Thunder
Tiger proudly presents to you the EB4 S3 Pro 1/8 scale competition buggy. The unique one piece delta-box machined hardened chassis is
one of the most rigid on the market. Combine this with the A7075-T6
Shock towers and you have a system the is bullet proof. Front A-arm
with adjustable pillow ball suspension, AD(anti-bumping) shocks with
3.5mm shafts provide various dampening and rebounding capabilities,
ultra long, light weight suspension arms, fuel tank with dual fuel
pick up, small transmission bulkheads with gasket, graphite front
brace, radio tray and center differential top plate, heavy duty CVD
universal drive train(front/center/rear), enclosed radio box protects
receiver and battery, laid down steering servo for low center of gravity,
complete set of rubber sealed ball bearings, adjustable toe, caster
and ackerman, and captured pins no e-clips required.
Part # TTR6230
K10 |
$399.99
|
|
Thunder
Tiger ST-1 1/8 Scale Nitro 4WD Stadium Racing Truck
FEATURES: Chassis: Ti anodized aluminum, 1/8" (3mm) thick.
Drive: Four wheel shaft drive
Radio System: with high-torque 8kg metal gear steering and throttle
servos. Engine: Thunder Tiger PRO-28BX-R pull-start 4.60cc with two
needle slide valve carburetor. Exhaust: Aluminum tuned pipe with header.
Fuel Tank: 5.1oz (150cc) flip top cap with splash guard. Clutch: Composite
3-shoe. Transmission: Single-speed, two-speed available optionally.
Ball Bearings: Full set included. Shocks: Four oil-filled, aluminum
bodied with 3.5mm diameter shafts,a maximum of eight shocks can be
installed. Main Gear: tooth, Gearboxes: Sealed. Differentials: Planetary
geared, three total. Brakes: Dual oil resistant fiber disk. Wheels:
Eight spoke chrome finish with 17mm hex. Body: Painted and trimmed
stadium truck. Radio Box: Enclosed, holds 5 AA size batteries. Suspension:
Pivot ball type with 3.5mm diameter front and rear sway bars. Caster:
Adjustable, equipped with variable toe and squat blocks, caster/toe-in
refers to the angle of the front suspension when viewed from the side
of the car in relation to the chassis. Camber: Adjustable, camber
refers to the angle of the tops of the tires from vertical when viewed
from front or behind vehicle. Steering: with low CG laydown servo
installation.
INCLUDES: Thunder Tiger ST-1 Racing Stadium
Truck, painted body, tires, foam inserts, painted body, wheels tooth
clutch bell, spur gear instructions, radio system.
REQUIRES: Radio Batteries: (8) AA size. Receiver
Battery: 6V
Part
# TTR6233 |
$399.99
|
| Traxxas Go to top of page |
|
Bigger. Faster. Louder. The Traxxas Slayer Pro 4X4 delivers the screaming sound and ballistic thrust that every nitro driver craves. Now with a 10% larger footprint, Slayer Pro 4X4’s new longer wheelbase chassis and wide track stance deliver enhanced stability in rough conditions and radically improved high speed cornering for incredible side-by-side, fender-banging racing action. Extreme TRX® 3.3 power punches hard and revs fast to rip past the competition. The amazing Revo®-Spec linkage-based suspension and hard-anodized GTR shocks deliver seemingly bottomless suspension travel that simulates the handling and jumping ability of full-size Pro 4X4 trucks. Slayer Pro 4X4’s new bodywork and officially licensed BFGoodrich® or Kumho tires bring together scale looks and 50+mph performance for all-day fun, excitement, and competition.
Features:
- New! 30mm longer chassis from the 8-time National Champion
Revo 3.3
- New! Extended suspension arms increase width by 26mm
- New! Hard-anodized, teflon-coated GTR shocks with
titanium-nitride shafts
- New! High-Torque, Waterproof steering and throttle servos
- New! Officially licensed BFGoodrich and Kumho tires
- New! Split-Spoke SCT wheels with chrome centers and
colored beadlock trim
- New! Aggressive, authentic Pro 4X4 body design
- New! TQ 2.4GHz High Output radio system with Traxxas Link
- TRX® 3.3 engine with EZ-Start® electric starting
- Polished Resonator dual-champer tuned pipe
- Auto-shifting 2-speed transmission
- Compact receiver box with integrated personal transponder mount
- High-flow dual-stage air filter
- Large capacity 150cc fuel tank
- Heavy-duty drivetrain with rubber-sealed ball bearings
- Ready-To-Race® with ProGraphix® factory-finished
and decaled body
Part # TRA5907
|
$439.99
|
|
Traxxas Nitro Sport - 2WD Nitro Truck
- Aggressive new body styling and ProGraphix® paint scheme
- Mirror-chrome Twin-Spoke™ 2.8" wheels
- High-traction Alias™ racing tires
- Full ball bearings
- Pre-glued tires
- EZ-Start® controller with built-in diagnostics
- Powder coated white springs
- Gray Ultra Shocks™
- Detailed owners manual
- Precision high-torque steering servo
Includes starter battery and wall charger!
Part # TRA4510
|
$274.99
|
|
The Traxxas Nitro Rustler is the first name in high performance 2WD nitro stadium trucks. Powered by the proven performance of the TRX 2.5 Racing Engine, Nitro Rustler totally out-muscles the competition with top speeds beyond 50 mph! The TRX 2.5 also pumps out the torque for brutal, wheel-standing launches and absolutely ruthless acceleration. The all-new body design cheats the wind with its smooth curves and low-slung stance, while the outrageous new graphics dominate with style. The separate wing securely bolts to the new body with precise aluminum hex hardware. Chrome 2.8 Twin Spoke™ rims are wrapped with pre-glued Alias™ step-pin tires in the rear and Alias™ ribbed tires up front. The high-tech rubber compound ensures great grip on a variety of surfaces. New gray. composite parts are thoughtfully integrated to enhance the look of the chassis. Fast, light, and loaded with power, Nitro Rustler’s power-sliding, dirt roosting attitude will have you reaching for the throttle again and again.
Now includes starter battery , wall charger and 2.4GHz Radio!
- New body, new ProGraphix® painted design
- Alias 2.8" tires with foam inserts pre-glued on mirror-chrome Twin-Spoke™ wheels
- 50+mph!
- TRX® 2.5 Racing Engine Part # TRX4407
|
$349.99
|
|
Traxxas Jato 3.3 RTR -
Combine the extreme power of the TRX 3.3 Racing Engine with the
incredible Traxxas Jato and the results will leave you speechless.
Stunning, jaw-dropping acceleration and face-distorting top speed
propel Jato performance into the stratosphere. It’s a power
packed combination for excitement we couldn't’t resist. Bury
the throttle and 60mph flies by in a mere 4.2 seconds. Top speed
is over 65mph! 2nd gear wheelies? You bet! The integrated wheelie
bar is included!
Now Includes 2.4GHz radio, Battery, and Charger!
NEW ON JATO 3.3
The Extreme Power of the TRX 3.3 Racing Engine™
Resonator™ blue-anodized aluminum tuned pipe
Front & rear sway bars for increased stability
Asphalt-hugging Anaconda™ performance tires
Mandatory trick wheelie bar
Aggressive new body graphics
0-60mph in 4.2 seconds
65+mph top speed Part
# TRA5507 |
$389.99
|
